Maximum Performance Using Denso Fuel Injection Pumps

by MOU YONG HONG on December 01, 2021
This article mainly introduces some of the advantages and main components of the fuel injection pump, and how to replace the fuel injection pump and achieve its best performance.

A fuel injection system pump may be a very complex piece of engineering. All are calibrated to deliver just the proper quantity of fuel via the fuel injector into the combustion chamber. This ensures the utmost power output and optimum fuel efficiency. Although their complexity makes it complicated to exchange individual parts, it's relatively easy to suit entire replacement units into place.

In most cases, the injection pump is driven indirectly from the crankshaft by gears, chains, or a toothed belt – often the timing belt – that also drives the camshaft. It rotates at half the speed of the crankshaft during a conventional 4 stroke engine.

The timing is precisely set consistent with the model of engine it services, in order that the fuel injection system pump introduces the proper volume of diesel into the cylinder chamber only a fraction of a second before the cylinder reaches the highest dead center position of its compression stroke. This ensures the fuel only becomes available from the fuel injector at the juncture of the cycle. At now, the warmth generated from the very high compression within the piston causes the diesel oil to ignite, generating power for the engine.

Fuel pump

Fuel injection pumps are precision-engineered components
Because fuel injection system pumps operate thousands of times a moment, ensuring their reliability may be a key challenge for any supplier and our own genuine pumps, backed by a 12-month warranty, are engineered for the precise requirements of your engine.

Our fuel injection system pumps are designed to the very best specification and make sure that we offer you precise calibration and fuel delivery. In turn, this helps to optimize your combustion cycles, thereby maximizing your power, efficiency, and fuel consumption.

Although we've tried to form the installation process as simple as possible, in practice, you'll need the assistance of your local distributor. it's important to make sure the setup is correct because the fuel injection system pump plays a task in limiting the emissions from your engine.


Please note, comments must be approved before they are published